Polyester Dotted Gloves: Everything You Need to Know Before You Buy

Walk into almost any packing unit, warehouse, or general assembly line in India and you'll spot them within minutes — thin, breathable gloves with little PVC dots printed across the palm. Nobody makes a big deal about them. They're cheap, they're everywhere, and most buyers order them without thinking twice. But if you're the one placing that order — comparing suppliers, checking gauge, trying to figure out if "dotted gloves" and "PVC dotted hand gloves" and "single side dotted gloves" are even the same thing — it helps to actually understand what you're buying.

Short answer: Polyester dotted gloves are lightweight, seamless knitted hand gloves — usually 13 gauge — with PVC dots on one side of the palm for basic grip. They're built for dry, light-duty handling: packing, sorting, general assembly, warehouse work. They're not meant for anything wet, oily, or heavy-duty — that's where nitrile coated gloves or latex coated gloves come in instead. If you already knew that much and just want the range, jump to Delight's five polyester dotted variants below. If not, keep reading — this covers the full picture: what these gloves are, how they stack up against coated gloves, which variant fits which job, pricing, care, and the FAQs we actually get asked.

Whether you're searching for a polyester dotted gloves manufacturer in India, comparing a dotted gloves price list across three or four suppliers, or just trying to figure out if PVC dotted gloves are even the right category for your team, this should get you there.

What Exactly Are Polyester Dotted Gloves?

Strip away the branding and a polyester dotted glove is a fairly simple product: a seamless knitted liner, usually spun from 13-gauge polyester yarn, dipped or printed with small PVC dots on one side — palm and fingers, typically. That's it. No rubber coating, no full dip, no heavy-duty layer.

The knit does the comfort work — it's what makes the glove breathable, flexible, and cheap to produce in bulk. The dots do the grip work, and only a modest amount of it. Compared to a nitrile palm coated glove or a latex coated glove, a dotted glove trades grip strength and durability for weight, price, and airflow.

That trade-off is actually the whole point. In the broader industrial safety gloves category — which includes everything from cut-resistant gloves to heat-resistant gloves to ESD gloves — polyester dotted gloves sit right at the entry level. They're general purpose safety gloves, plain and simple, and they're usually the first thing a facility stocks up on before figuring out where it actually needs something heavier.

Why Do People Still Buy Dotted Gloves When Coated Gloves Exist?

Fair question, and one we get a lot from buyers who've only ever used nitrile or latex gloves before. A few real reasons dotted gloves haven't gone anywhere:

They're genuinely cheap. Of everything in the hand protection lineup, PVC dotted gloves are usually the lowest cost per pair by a wide margin. When you're handing out gloves by the thousand rather than reusing the same pair for weeks, that matters a lot more than it sounds.

They breathe better. Only one side of the glove is dotted — the rest stays open knit. On a hot factory floor or during a long shift, that's a noticeably cooler glove than a fully coated one.

Enough grip for dry work, no more, no less. On cartons, paper, dry components, and general materials, the dots do their job. Nobody's expecting them to grip like a rubber-coated palm, and for dry handling, they don't need to.

They're disposable-adjacent without being disposable. Cheap enough to hand out freely, durable enough to reuse a few times — a nice middle ground for short tasks, visitor use, or general floor work where a coated glove would be overkill.

Where they fall short: anything wet, oily, or abrasive. The dots just don't hold up there, and that's fine — that's not the job they're built for.

Dotted Gloves vs Coated Gloves: The Real Difference

People often lump all "grip gloves" together, but the surface material changes everything about how long a glove lasts and what it's actually good for.

Glove Type	Dry Grip	Wet/Oily Grip	Breathability	Best For
PVC Dotted (Polyester)	Moderate	Weak	Highest	Light dry handling, packing, general assembly, short-task or visitor use
Nitrile Coated	Strong	Strong	Moderate	Metal parts, warehousing, oily or greasy handling
Latex Coated	Strong	Weak (softens with oil)	Moderate	General handling, agriculture, damp conditions
Plain Knitted (No dots)	Weak	Weak	Highest	Liner use, dust protection, very light contact only

Bottom line: if the job is dry — think cartons, paper, light parts — polyester dotted gloves cover it at the lowest cost per pair. If oil, moisture, or repeated rough contact is part of the day, a nitrile or latex coated glove is going to outlast a dotted pair by a mile, because the dots only cover part of the surface and don't do much once things get slick.

Delight's Polyester Dotted Glove Range

We currently manufacture and supply five polyester dotted variants, all built on the same seamless 13-gauge knitted liner — the differences come down to base color and dot color, so pick whichever fits your color-coding or visibility needs.

Delight MPKD13-62(W) — White Polyester PVC Dotted Gloves

The base model in the lineup. A 13-gauge white polyester liner with single-side PVC dots — nothing fancy, just a straightforward, breathable, budget-friendly dotted glove that's easy to reorder in volume. If you just need a reliable dry-handling glove for packing or general work, this is usually where to start.

Available size: Free Size 🔗 View full specifications — Delight MPKD13-62(W) →

Delight MPKD13-62(R) — Red & White Dotted Gloves

Same white 13-gauge liner, but with red and white PVC dots on top. A small but useful upgrade if you like to color-code gloves by task, shift, or department — the red is easy to spot at a glance on a busy floor.

Available size: Free Size 🔗 View full specifications — Delight MPKD13-62(R) →

Delight MPKD13-62(BL) — Blue & White Dotted Gloves

The blue-dot sibling to the red variant above — same liner, same gauge, same everyday-handling use case. Comes down to color preference, or how your team happens to organize gloves across lines or shifts.

Available size: Free Size 🔗 View full specifications — Delight MPKD13-62(BL) →

Delight MPKD13-62(O) — Blue Base, White Dotted Gloves

This one flips the usual pattern — a blue polyester base with white PVC dots instead of a white base with colored dots. Same grip, same gauge, just a different look that shows up better against light-colored packaging or materials.

Available size: Free Size 🔗 View full specifications — Delight MPKD13-62(O) →

Delight MPKD13-62(BLK) — Black Polyester PVC Dotted Gloves

A fully black 13-gauge liner with single-side PVC dots. The obvious advantage: it hides dirt and grime far better than any of the lighter-colored variants, which makes it a practical pick for maintenance work, loading, or any task where gloves get dirty fast.

Available size: Free Size 🔗 View full specifications — Delight MPKD13-62(BLK) →

Quick Comparison: All Five Variants Side by Side

Feature	MPKD13-62(W)	MPKD13-62(R)	MPKD13-62(BL)	MPKD13-62(O)	MPKD13-62(BLK)
Liner Material	Polyester	Polyester	Polyester	Polyester	Polyester
Gauge	13 Gauge	13 Gauge	13 Gauge	13 Gauge	13 Gauge
Base Color	White	White	White	Blue	Black
Dot Color	White	Red & White	Blue & White	White	Single tone
Dot Type	Single Side	Single Side	Single Side	Single Side	Single Side
Best For	General reorders, high volume	Color-coded floors	Color-coded floors	Contrast against light materials	Dirt-heavy or maintenance work
Size	Free Size	Free Size	Free Size	Free Size	Free Size
Reusable	Yes	Yes	Yes	Yes	Yes

Want current stock and bulk pricing? That's easier over a quick call than a webpage — reach us on WhatsApp or phone at +91-8740977703.

What Actually Affects Polyester Dotted Gloves Price?

Here's the honest answer: there's no fixed rate card, and there shouldn't be. Price moves with order quantity, current polyester yarn and PVC input costs, and whether you want a specific dot-color combination. A number that's accurate this month might not hold three months from now — so rather than publish something that goes stale, we quote based on what you actually need.

If you're building out a dotted gloves price list from a few different suppliers to compare, ask each one the same set of questions: what gauge are they actually quoting (13 gauge isn't universal — some suppliers cut corners with 10 gauge and call it comparable), is the dot pattern single-side or double-side, what's their minimum order quantity, and does the number include GST and freight. Comparing apples to apples matters more than the number itself. Tell us your quantity and we'll get back with pricing that fits — small trial order or full wholesale.

How Do I Pick the Right Polyester Dotted Glove?

A handful of quick questions usually settles it:

Is the work actually dry, or is there any moisture or oil involved? Dotted gloves are made for dry conditions. Any regular contact with oil, grease, or water calls for a nitrile or latex coated glove instead — pushing dotted gloves into wet work just means faster wear and less grip when you need it.

Do you need to color-code gloves across your floor? With options in white, red-and-white, blue-and-white, blue-with-white-dots, and black, it's simple to assign a color to a task, department, or shift if that's useful for how your operation runs.

How fast do your gloves usually get replaced? Dotted gloves are made for high-turnover use. If you need something that survives weeks of heavier contact without replacement, a coated glove is the better long-run buy, even at a higher price per pair.

Does hiding dirt and grime matter? The black variant holds up visually better than the lighter colors when gloves get dirty fast — worth considering for maintenance or loading roles.

Where Are Polyester Dotted Gloves Actually Used?

Across Indian factories, warehouses, and general industrial settings, dotted gloves show up wherever the work is light, constant, and dry:

Packing and warehousing — the single biggest use case. Picking, packing, carton handling, general goods movement — anywhere a light grip is enough and cost per pair actually matters because you're buying in volume.

General assembly — light component handling where breathability and dexterity beat raw grip strength.

Visitor and short-task use — most facilities keep a box of dotted gloves at the gate or on the floor for occasional or short-duration tasks that don't justify a full coated glove.

Logistics and loading — sorting, loading, general dry-goods movement where a basic grip glove does the job without adding bulk.

General industrial and hardware supply — anywhere a low-cost, dependable glove for everyday dry handling is genuinely all that's needed.

So, Dotted or Coated — Which One Do You Actually Need?

This is probably the most common question we get from first-time buyers, so here's the direct version: are PVC dotted gloves as good as nitrile or latex coated gloves? Not universally, no — and that's not really the right comparison to make. It depends entirely on what your hands are touching.

Dotted gloves win on cost and breathability. If your team handles dry materials in volume and gloves need replacing often anyway, the lower price per pair makes dotted gloves the practical default — no point paying coated-glove money for a job that doesn't need coated-glove protection.

Nitrile and latex coated gloves win on durability and grip under harder conditions — oil, moisture, repeated abrasive contact. They cost more, but they last longer where dotted gloves would wear through fast.

Simple rule of thumb: dry, budget-driven, high-volume work → dotted gloves. Wet, oily, or heavier-duty work → coated gloves. Still not sure which bucket your work falls into? Just tell us what your team handles and we'll point you to the right one instead of guessing.

Mistakes We See Buyers Make With Dotted Gloves

Using them for wet or oily tasks. The PVC dots weren't designed for moisture resistance — that's a nitrile or latex coated glove's job, not a dotted glove's.

Assuming every "dotted glove" on the market is identical. Gauge, dot density, and knit quality vary a lot between suppliers even when the listing looks the same on paper. Ask for a sample before committing to a bulk order.

Choosing on price alone without checking gauge. A thinner knit feels similar in the hand but tears through faster on the floor. Confirm actual gauge, not just the price per pair.

Leaning on dotted gloves for tasks that need real cut or abrasion protection. For rough materials or sharp edges, step up to a cut-resistant or coated glove instead — dotted gloves aren't built for that kind of contact.

Storing gloves somewhere damp or dusty. Polyester holds up better than cotton in storage, but the PVC dots can still degrade faster than expected if gloves sit in poor conditions for too long.

Care & Maintenance

• Cleaning: A quick hand wash with mild soap works if needed, though given the low cost, most buyers simply replace rather than repeatedly wash these.

• Drying: Air dry away from direct heat — heat can soften or lift the PVC dots from the fabric over time.

• Storage: Keep gloves dry, clean, and away from oils or solvents that can weaken the dot coating.

• Inspection: Check the dots periodically for peeling or thinning — early signs that grip is already dropping off.

• Replacement: Once the dots visibly wear or the knit starts fraying, it's time for a fresh pair rather than pushing it further.

• 
  

Frequently Asked Questions

What are polyester dotted gloves used for? Light, dry general handling — packing, loading, assembly, short-duration or visitor tasks — anywhere basic grip on dry materials is enough, at a low cost per pair.

Are polyester dotted gloves waterproof or oil resistant? No. The PVC dots add dry-condition grip only. For any regular exposure to oil or water, a nitrile or latex coated glove will perform and last much better.

Can polyester dotted gloves be washed and reused? Yes, but because they're so inexpensive, most buyers treat them as a high-turnover item and simply replace them rather than washing repeatedly.

What's the actual difference between dotted gloves and coated gloves? Dotted gloves have PVC dots on part of the palm for light dry grip. Coated gloves (nitrile, latex, PU) are dipped fully or partially in a rubber or polymer layer for stronger, longer-lasting grip and real resistance to oil and moisture. Dotted gloves are cheaper and cooler to wear; coated gloves last longer under harder use.

What sizes do polyester dotted gloves come in? All five variants in Delight's range come in Free Size.

What's actually different between the five color variants? Nothing on the performance side — same 13-gauge liner, same single-side PVC dot construction across all five. The only difference is base color and dot color, which usually comes down to visibility preference or how a facility color-codes gloves by task.

How much do polyester dotted gloves cost? It depends on quantity and dot-color combination, so there's no fixed published rate — pricing is quoted based on your specific order, whether that's a small trial batch or a wholesale run. Share your quantity with us for a current number.

Where can I find a reliable polyester dotted gloves supplier in India? Look for a supplier who shares clear, verifiable specs, keeps consistent stock across colors, and offers flexible pricing for both small and bulk orders. Delight Safety supplies polyester dotted and other industrial safety gloves across India — reach out with your requirement.

Are dotted gloves better than coated gloves? Depends on the job, not a universal answer. Dotted gloves are cheaper, lighter, and more breathable — a solid default for high-volume dry handling. Coated gloves cost more but resist oil, moisture, and abrasion far better over time. Dry and budget-driven → dotted. Wet or oily → coated.

How long do polyester dotted gloves actually last? They're built for shorter-cycle, high-turnover use rather than long-term reuse. With reasonable care, expect a pair to hold up over several days to a couple of weeks of regular dry handling before the dots visibly wear down.

Does Delight manufacture these gloves or just resell them? Delight Safety manufactures and supplies polyester dotted and other industrial safety gloves, working with everyone from single-factory buyers to wholesale distributors. If you're after a long-term dealer relationship rather than a one-off order, check out our dealer program.

You Might Also Find Useful

• Latex Coated Gloves: Everything You Need to Know Before You Buy

• Nitrile Palm Coated Gloves: Everything You Need to Know Before You Buy

• The Complete Guide to Industrial Safety Gloves

• Browse all Hand Protection products →

  
  

Where to Buy Polyester Dotted Gloves

All five variants are available for bulk and wholesale ordering, with pricing that flexes to your quantity. We work with single-site factories, distributors, and wholesale dealers placing recurring orders across India. If you're a distributor rather than an end user, our dealer program is built specifically for that kind of ongoing relationship.

📞 Call/WhatsApp: +91-8740977703 🔗 Browse Delight's full Polyester Dotted glove range → 🔗 Contact us → 🔗 Become a dealer →

Conclusion

Polyester dotted gloves aren't glamorous, but they solve a real problem: dry, high-volume handling work that doesn't need a full rubber coating and shouldn't cost coated-glove money. All five variants in Delight's range share the same 13-gauge build and grip performance — the choice between them really just comes down to color and how your floor likes to organize things. Still unsure whether dotted or coated is the right call for your team? Tell us what you're handling and how many pieces you need, and we'll match you to the right glove and a price that fits your order size.

Written by Mahesh Prakash, Head of Marketing at Delight Safety